Anyone can investigate biological activity in farm fields or backyard gardens. Bury a pair of 100 percent white cotton underwear in topsoil for about two months and then check the level of decomposition. If there’s not much left of the underwear you have good biological activity, which indicates healthy soil. These same soil organisms can break down plant materials in much the same way.
From the February 16, 2016 issue of Agri-New
Most producers test their soils routinely every fall, after harvest or early in the spring. Information from these tests give you the knowledge to plan the following crop’s fertilizer plan. How can you get the most return for this investment in testing?
There are several ways to soil sample. The most common method of soil testing is the 0 – 6 inch representative sample. You take 15 – 20+ samples in a field, selecting various slope positions, to try and get a good average sample. From those mixed samples the field sample is taken and sent away, hopefully giving you a good average for the field.
Another approach is benchmarking. That is where you pick one or a few spots in the field, have it located on GPS and come back to that same location for samples every year. It doesn’t give you an average but it can give you an idea as to how the field changes in nutrient levels, as long as you’ve picked a location that is average. That means it is not located at the bottom of the slope or right at the top but somewhere in the middle.
Using GPS, harvest records and precision agriculture has been gaining popularity lately where you try to correlate the harvest yields to detailed soil tests. This can give a more detailed picture of the ultimate productivity of the soil but requires several years of data to filter out the extremes from weather and vagaries of the crop year.
Different test labs have different procedures and you need to know what applies to your area and soils.
An example of this is the phosphorus test. The accepted, accurate test for phosphorus in the Canadian West is the modified Kelowna test. If your soil test lab is using some other test, it might be better suited to soils in Eastern Canada and may give a misleading result.
Macronutrients are the first thing you focus on from the tests. These are Nitrogen (nitrate), Phosphorus (phosphate), Potassium (potash), and sulfur (sulfate). There can be differences in how it is reported as it is often stated in pounds per acre or parts per million (ppm). If using ppm on a 0 – 6 inch sample, double the ppm to get your pounds per acre.
Micronutrients to look at are mostly just copper (Cu). Amounts below 0.6 ppm may show symptoms of deficiency. Ergot in cereals is linked to copper deficiency but the majority of the time ergot also occurs due to moist, cool conditions at head emergence. There is also a lot of hype promoting boron in canola. If you feel it might help, try a few test strips in the field and measure the results at harvest. Other than copper, most fields in Alberta do not show any symptoms of micronutrient deficiency and will not provide a yield boost if micronutrients are applied.
Organic matter (OM) is an important gauge of the nutrient bank account in your soil. High organic matter soils are much more forgiving if you cut your fertilizer rates for a year. It can compensate by providing more nutrients if the year is wetter than expected. Conversely, low organic matter in soil leaves it more susceptible to nutrient deficiencies. Very low organic matter leads to structural problems in soil with crusting and poor moisture penetration. OM increases as moisture regime gets wetter so black soils contain more OM than the brown or dark brown soils.
Soil pH is a measure of acidity or alkalinity. It is best at neutral, 7.0 but most crops grow well from a pH of 5.6 – 8.0. Once soils become more alkaline (higher) than 8 or more acid (lower) than 5.5 you start having limited choices for crop type. You can adjust pH with the addition of some bulk fertilizer products but volume needed to change pH usually make it uneconomical.
Electrical conductivity is a measure of how many salts are in the soil. Too saline and you limit what crops will grow and thrive. High salt content in the soil prevents the normal operation of osmosis which is how the plant roots obtain water. An EC of 1 or less is good. More than 1 and some crops do not grow well.
There are other tests and measures provided on some tests but they have limited value for the average producer. Cation exchange capacity (CEC) lets you know how many cations the soil particles can have adhering to it. It is linked to the amount of clay in the soil. High CEC just means there is a lot of clay in the soil.
If you do apply some micronutrients or “special” wonder products, measure and compare the results to assure yourself that these products do add value. Make every fertilizer dollar add to profits and not just costs.
Focus on the information you can use to manage the fertility plan for the coming year’s crops. If you need help with interpretation, call the Ag-Info Centre at 310-FARM (3276) you can also give Dr. Yamily Zavala a call at the CARA office for assistance in interpreting the results from the soil sampling. Watch for future development of CARA’s Soil Health Lab.
Ross McKenzie, Grainews May 9, 2016
Soil compaction can occur at the soil surface in the form of soil crusting, or it can occur in the subsoil. Soil compaction is sometimes blamed for reduced crop productivity, but it is important to correctly diagnose the cause or causes of reduced crop production. Poor plant growth can be caused by a number of factors, including soil compaction.
The first step is to correctly diagnosis if a soil compaction problem exists, and then develop short- and long-term management practices to prevent further damage.
Soil compaction can occur at different times of the year through different mechanisms. Careful observations can help diagnose the problem. If the answer to these questions is “yes,” you may have a soil compaction problem.
-Is there poor crop growth in all years, with all crop types in the same area of the field?
-Is there a spatial pattern to the crop growth (associated with wheel tracks, windrows, equipment widths, haul trails)?
-Does the soil surface appear smooth and crusted?
-Has there been a change in equipment size, weight or operations?
-Are there soil types in the field with naturally dense horizons such as eroded knolls?
-If you scrape away the surface soil with a shovel or trowel, can you see dense layers and/or horizontal root growth?
Producers have a lot at stake when it comes to personal property, and their property is often spread across multiple locations, in different buildings or in different fields. You cannot be everywhere at once, but there are still things you can do to be proactive.
READ MORE… TIPS TO IMPROVE YOUR FARM SECURITY
Effective April 1, 2018, producers will need to have an EFP completion letter dated within the last 10 years to be considered current and eligible for cost-share funding with the Environmental Sustainability and Climate Change programs of the Canadian Agriculture Partnership (CAP). That means, for example, if you apply in September 1, 2018, your EFP will need to have been approved on or after September 1, 2008 to be considered for current funding.
by Charles Geddes, Research Scientist AAFC
Julia Leeson, a Weed Monitoring Biologist with Agriculture and Agri-Food Canada, led a team that worked hard this year surveying weed species in Alberta field crops. Generally, the provincial weed survey takes place in July and August, following in-crop weed management, once every decade since the 1970’s.
Cover crops are planted with the intent to build and improve the soil. Cover crops are usually seeded in diverse annual mixes comprised of five, ten, or even twenty species, although they can include biennial or perennial species. Cover crops can be used to protect soil and prevent it from eroding, build organic matter and work as a green manure or plough-down crops. Companion crops, as they are also known, can be a valuable and quick-growing source of forage for livestock, and provide grazing in the same year the crop is seeded. Cover crops also allow cropland and pastures to be more efficient with water and nutrient cycling, and less reliant on costly inputs such as fertilizer.
read more…. BCRC Cover Crops Fact Sheet
5 frequently asked questions about Land Rental
http://www1.agric.gov.ab.ca/$department/deptdocs.nsf/all/faq7303
Strong commodity prices have generated positive profit margins for most producers. With interest rates low and cash reserves available, many producers are considering either cash or leverage-investment purchases into an active farmland market. A well-researched financial plan will guard against ill-prepared decisions (do your homework before making a final decision).